Bienvenido Entrar

producto vacío

No hay productos

0,00 € Transporte
0,00 € Total

Estos precios se entienden sin IVA

Categorías

Ampliar

ICOM IC-7600

Emisora HF/50MHz IC-7600

ICOM IC-7600

Transceptor HF/50MHz

- Doble DSP

- Receptor de doble conversión superheterodino

- Unidad TCXO de alta estabilidad

- Función doble vigilancia en misma banda

- Display TFT 5.8" ángulo de visión ultraancho

- Operación RTTY/PSK31 con teclado USB

- Conector USB en frontal y trasera

- Acoplador antena automático alta velocidad

- Potencia Tx: 100W

- Ecualizador de micro y ancho de banda ajustable de transmisión

Frequency coverage: U.S.A. version (#02)	Rx : 0.030– 60.000MHz^1 Tx : 1.800– 1.999MHz 3.500– 3.999MHz 5.255–　5.405MHz^1 7.000– 7.300MHz 10.100– 10.150MHz 14.000– 14.350MHz 18.068– 18.168MHz 21.000– 21.450MHz 24.890– 24.990MHz 28.000– 29.700MHz 50.000– 54.000MHz
Frequency coverage : Europe (#03), Europe-1 (#04) version	Rx 0.030– 60.000MHz*¹ Tx 1.810– 1.999MHz 3.500– 3.800MHz 7.000– 7.100MHz (Europe version only) 7.000– 7.200MHz (Europe-1 version only) 10.100– 10.150MHz 14.000–14.350MHz 18.068– 18.168MHz 21.000–21.450MHz 24.890– 24.990MHz 28.000–29.700MHz 50.000– 52.000MHz
Modes	LSB, USB, CW, RTTY, PSK31, AM, FM
Number of memory channels	101 (99 regular, 2 scan edges)
Antenna impedance	50Ω unbalanced (Tuner off)
Antenna connector	SO-239×2 and RCA ×1 (RX only)
Power supply requirement	13.8V DC±15%
Temperature range	0°C to +50°C; +32°F to +122°F
Frequency stability	Less than ±0.05ppm (0°C to +50°C)
Frequency resolution	1Hz (minimum)
Power consumption	Rx Stand-by 3.0A (typ.) Max. audio 3.5A (typ.) Tx Max. power 23A
Dimensions (W×H×D) (projections not included)	340×116×279.3 mm; 13.39×4.57×11 in
Weight (approx.)	10kg; 22.0lb

*1 Some frequency bands are not guaranteed.

Output power (continuously adjustable)	SSB, CW, FM, RTTY, PSK31 : 2–100W AM : 1–30W
Modulation system	SSB : Digital PSN modulation FM : Digital phase modulation AM : Digital low power modulation
Spurious emission	HF bands : Less than -50dB 50MHz bands : Less than -63dB
Carrier suppression	More than 40dB
Unwanted sideband suppression	More than 55dB
Microphone impedance	600Ω (8-pin connector)

Receive system	Double conversion super-heterodyne system
Intermediate frequencies	1st : 64.455MHz 2nd : 36kHz
Sensitivity (typical)	SSB, CW, RTTY (BW : 2.4kHz at 10dB S/N) 1.8–29.995MHz 0.15μV ¹ 50.0–54.0MHz 0.12μV ² AM (BW : 6kHz at 10dB S/N) 0.1–1.8MHz 6.3μV ¹ 1.8–29.995MHz 2.0μV ¹ 50–54.0MHz 1.6μV ² FM (BW : 15kHz at 12dB SINAD) 28–29.97MHz 0.5μV ¹ 50.0–54.0MHz 0.32μV *²
Squelch sensitivity (Preamp: ON, Threshold)	SSB Less than 3.2 μV FM Less than 0.3 μV
Selectivity (filter shape: sharp)	SSB (BW : 2.4kHz) More than 2.4kHz/–6dB Less than 3.8kHz/–60dB CW (BW : 500Hz) More than 500Hz/–6dB Less than 900Hz/–60dB RTTY (BW : 350kHz) More than 350Hz/–6dB Less than 650Hz/–60dB AM (BW : 6kHz) More than 6.0kHz/–6dB Less than 15kHz/–60dB FM (BW : 15kHz) More than 12kHz/–6dB Less than 20kHz/–60dB
Spurious and image rejection ratio	More than 70dB (Except 50MHz through point)
Audio output power	More than 2.0W at 10% distortion with an 8Ω load
RIT variable range	±9.999kHz
PHONES connector	3-conductor 6.35 (d) mm (¹⁄4″)
EXT SP connector	2-conductor 3.5 (d) mm (¹⁄8″) /8Ω

*1 Preamp-1 : ON
*2 Preamp-2 : ON

Matching range	HF bands : 16.7Ω to 150Ω unbalanced¹ 50MHz band : 20Ω to 125Ω unbalanced ²
Minimum operating power	HF bands : 8W 50MHz band : 15W
Tuning accuracy	VSWR 1.5:1 or less (Motor stopped)
Insertion loss	Less than 1.0dB (after tuning at 100W output)